11
Notes on the type plate
The type plate provides important data such as the type designation, order number, and sometimes regulatory characteristics.
To avoid loss of this data in case the type plate becomes illegible, it should be entered in the manual.
Type identification plate (example)
Note on Low Voltage Directive
The protection objectives of the Low Voltage Directive 2014/35/EU are met in accordance with Annex I, No. 1.5.1 of the
Machinery Directive 2006/42/EC.
Note on Pressure Equipment Directive
Due to its performance characteristics, the product does not reach the limit values defined in Article 4, Paragraph 1,
Subparagraph (a) (ii) and is excluded from the scope of Pressure Equipment Directive 2014/68/EU in accordance with Article 1,
Paragraph 2 Subparagraph (f).
Notes related to the TüV approval mark
This test mark, also referred to as the
"cTUVus mark," serves as proof of
compliance with the Canadian national
standards adopted by the Standards Council
of Canada (SCC) and US national standards.
Notes on CE marking
CE marking is effected following the
requirements of the applied directives
requiring a CE marking:
• 2014/30/EC Electromagnetic Compatibility
• 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS II)
To Next Page
Loading...
Need help?
General
