9
1. Safety instructions
General safety instructions
• Putting the products into operation or operating them without having read the instructions is prohibited. The operator must
ensure that the instructions are read and understood by all persons tasked with working on the product or who supervise or
instruct such persons. Retain the instructions for further use.
• The product may only be used in awareness of the potential dangers, in proper technical condition, and according to the
information in this manual.
• Any faults that could affect safety must be remedied according to responsibility. The supervisor must be notified immediately
in case of malfunctions outside one's individual scope of responsibility.
• Unauthorized modifications and changes can have an unpredictable effect on safety and operation. Unauthorized
modifications and changes are therefore prohibited. Only original SKF spare parts and SKF accessories may be used.
• Any unclear points regarding proper condition or correct assembly/operation must be clarified. Operation is prohibited until
issues have been clarified.
• The components used must be suitable for the intended use and the applicable operating conditions, e.g. max. operating
pressure and ambient temperature range, and must not be subjected to torsion, shear, or bending.
General electrical safety instructions
• Electrical devices must be kept in proper condition. This must be ensured by periodic inspections in accordance with the
relevant applicable standards and technical rules. The type, frequency, and scope of the inspections must be determined in
accordance with the risk assessment to be carried out by the operator. Work on electrical components may be performed only
by qualified electricians. Connect the electrical power only in accordance with the valid terminal diagram and in observance of
the relevant regulations and the local electrical supply conditions.
• Work on electrical components may be performed only in a voltage-free state and using tools suitable for electrical work. Do
not touch cables or electrical components with wet or moist hands.
• Fuses must not be bridged. Always replace defective fuses with fuses of the same type.
• Ensure proper connection of the protective conductor for products with protection class I. Observe the specified enclosure
rating.
• The operator must implement appropriate measures to protect vulnerable electrical devices from the effects of lightning during
use. The electrical device is not furnished with a grounding system for the dissipation of the respective electric charge and
does not have the voltage strength necessary to withstand the effects of lightning.
General behaviour when handling the product
• Familiarize yourself with the functions and operation of the product. The specified assembly and operating steps and their
sequences must be observed.
• Keep unauthorized persons away.
• Wear personal protective equipment always.
• Precautionary operational measures and instructions for the respective work must be observed.
• In addition to these Instructions, general statutory regulations for accident prevention and environmental protection must be
observed.
• Precautionary operational measures and instructions for the respective work must be observed. Uncertainty seriously
endangers safety.
• Safety-related protective and safety equipment must not be removed, modified or affected otherwise in its function and is to be
checked at regular intervals for completeness and function.
• If protective and safety equipment has to be dismantled, it must be reassembled immediately after finishing the work, and then
checked for correct function.
• Remedy occurring faults in the frame of responsibilities. Immediately inform your superior in the case of faults beyond your
competence.
• Never use parts of the centralized lubrication system or of the machine as standing or climbing aids.
Intended use
Supply of lubricants.
The product is intended solely for installation in another machine.
Use is only permitted within the scope of commercial or economic activity by professional users, in compliance with the
specifications, technical data, and limits specified in this manual.
To Next Page
Loading...
Need help?
General
