MAINTENANCE PROCEDURES
This section includes instructions for
basic maintenance procedures. If you
have the necessary mechanical skills
and the required tools, you can per-
form these procedures. If not, see
your authorized Ski-Doo dealer.
Other important items in the mainte-
nance schedule that are more difficult
and require special tools are best per-
formed by your authorized Ski-Doo
dealer.
WARNING
Turn off the engine, remove tether
cord cap and follow these mainte-
nance procedures when perform-
ing maintenance. If you do not
follow proper maintenance pro-
cedures you can be injured by hot
parts, moving parts, electricity,
chemicals or other hazards.
WARNING
Should removal of alocking device
(e.g. lock tabs, self-locking fasten-
ers, etc.) be required when un-
dergoing disassembly/assembly,
always replace with a new one.
Air Filter
AirFilterCleaning
550F Model
Remove filter from air inlet duct.
Shake the snow out of filter, then, dry
it out.
mmr2007-166-010_a
TYPICAL
1. Air filter installed in air inlet duct
Open hood and make sure the filter on
air silencer is free of snow.
mmr2007-166-011_a
1. Air filter installed on top of air silenc
er
V800 Model
mmo2007-001-004_a
1. Air filter
2. Air silencer
66
______________
To Next Page
Loading...
Need help?
General
