Skyjack SJ12 E - Page 38

38
SJ12 E, SJ16 E, SJ20 E243762ABA
Section 4 – Inspections Before Operation
Visual and daily maintenance inspections
4
Hydraulic pump and motor
▪
Make sure there are no loose or missing
fasteners.
▪
Make sure there is no visible damage.
5
Steer linkages
▪
Make sure there are no loose or missing
fasteners and lock pin.
▪
Make sure the steer linkages and bushings are
correctly attached.
▪
Make sure there is no visible damage.
6
Wheel/motor assembly
▪
Make sure there are no loose or missing
fasteners.
▪
Make sure there is no visible damage.
▪
Make sure there are no loose or missing wires.
7
Tilt sensor
▪
Make sure the tilt sensor is correctly attached.
▪
Make sure there is no visible damage.
▪
Make sure there are no loose or missing wires.
4
5
6
1
2
3
7