Page 73 of 128
14.4 Standard setup
SLE1000 can be used with air and oxygen gas supplies or air only. For use with
air and oxygen start with section 14.4.1 on page 73 and for air only start with
section 14.4.2 on page 74.
14.4.1 With Air and Oxygen from a wall supply between 2 and 7 bar
Step 1. Connect the air and
oxygen hoses to the
SLE1000.
Step 2. Connect the air and
oxygen hoses to the wall
supplies.
Step 3. Connect SLE1000 to
mains power. Do not turn
the SLE1000 on.
Proceed to “Functional
testing prior to patient
use” on page 80.
To Next Page
Loading...
