Page 78 of 128
14.9 Mains isolation
To isolate the SLE1000 electrically from the mains supply,
remove the mains plug.
14.10 Extended storage and transportation
14.10.1 Storage
If the user is intending to store the driver for a period greater than 10 days and is
unable to charge the batteries during this time as recommended in the “Warnings”
on page 19, then the following procedure is recommended. (Refer the ventilator
to a qualified technician).
14.10.2 Transportation
If the user is intending to transport the driver then the battery fuse must be
removed. (Refer the ventilator to a qualified technician)
14.10.2.1 Fuse removal procedure
Step 1. Charge the batteries for 8 hours.
Step 2. Remove the battery fuse by reversing the process described in ’14.1
First use’ on page 70.
Step 3. Ensure that the fuse remains with the unit.
Step 4. Mark the unit as having the battery disconnected.