Page 97 of 128
Set Flow
Indicator that the flow can be
selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Set Oxygen Level
Indicator that the Oxygen Level can
be selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Show Batt. level
Indicator that the Battery Level can be
selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Show Alarm Hist. Indicator that the Alarm History can be
selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Set Trigger Sen. Indicator that the Trigger Sensitivity
can be selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Start O2 Calib Indicator that the O2 calibartion
routine can be selected.
Clears itself after 5 sec.
If selected clears after 10
sec.
Been used for: Display of the battery charge level in
percent
The user has to press the
alarm mute button to cancel
display.
SLE1000 Ver. N.N Version display during power-on-self-
test.
Clears itself on completion
of the power-on-self-test.
Ready... Indicates that power-on-self-test has
completed.
Clears itself after 2 sec.
<no message> Indicates that a particular history log
location does not have any stored
event (i.e. alarm has not occurred)
None
User message Description Action
To Next Page
Loading...
