SMART Board 6065 - Chapter 4 Setting Up Your Interactive Flat Panel and Computer; Turning On Your Interactive Flat Panel and Computer for the First Time; Installing SMART Software

Chapter 4
17 smarttech.com/kb/170642
Chapter 4: Setting up your interactive flatpanel
and computer
Turning on your interactive flat panel and computer for the first time 17
Installing SMART software 17
Downloading and installing SMART software 18
Running the connection wizard 18
This chapter explains how to set up your interactive flat panel and computer after mounting your
interactive flat panel and connecting power and devices.
Turning on your interactive flat panel and
computer for the first time
After connecting your computer to the interactive flat panel (see Connecting the computer on
page14) and mounting the interactive flat panel (see Mounting your interactive flatpanel on
page9), you can turn on both devices.
To turn on your interactive flat panel and computer for the first time
1. Turn on your computer.
2. Turn on your interactive flat panel by flicking the power switch beside the AC power inlet.
3.
Press the Standby button on the front control panel.
Installing SMART software
To take full advantage of your interactive flat panel’s features, you must download and install
SMART software on your computer.
With the purchase of your interactive flat panel, you get a license for SMARTNotebook software
and a one-year subscription to the SMARTNotebook Advantage software maintenance plan. See
smarttech.com/notebook for more information.