SMART Board 6065 - Updating Firmware; Updating Software; Orienting Your Interactive Flat Panel

CHAPTER 6
MAINTAINING YOUR INTERACTIVEFLATPANEL
24 smarttech.com/kb/170642
To open SMARTSettings on Windows 8 operating systems
1. Open the Apps screen.
2. Press SMARTSettings.
SMARTSettings appears.
To open SMARTSettings on Mac OS operating system software
1.
Press the SMARTBoard icon in the Dock.
2. Press SMARTSettings.
SMARTSettings appears.
Updating firmware
Your interactive flat panel uses firmware on its processor. You can update the firmware. For more
information, see Upgrading the firmware on your SMART Board 6065 interactive flat panel.
Updating software
SMARTProductUpdate (SPU) is included in the SMART software you installed to use your
interactive flat panel (see Installing SMART software on page17). SPU periodically checks for
updates to the SMART software posted on the SMART website. You can configure SPU to prompt
users to install updates or to install updates automatically.
NOTE
If you didn’t install SPU, you can download updates to SMART software from
smarttech.com/downloads.
Orienting your interactive flat panel
If the location of your touch is misinterpreted (the pointer appears a distance from the actual
contact), orient your interactive flat panel.
NOTE
You can use your finger or an interactive flat panel pen to orient your interactive flat panel.