Chapter 5
19 smarttech.com/kb/170642
Chapter 5: Using your interactive flat panel
Turning on and turning off your interactiveflatpanel 19
Resetting your interactiveflatpanel 20
Using your interactive flat panel with thecomputer 20
Using SMART software 20
Menu control panel 21
Using Pen ID 21
Changing the pen settings 21
Restoring pen to default settings 22
Erasing on the interactive flat panel 22
This chapter explains how to use the key features of your interactive flat panel.
Turning on and turning off your
interactiveflatpanel
You can turn on and turn off your interactive flat panel using the front control panel.
To turn on your interactive flat panel
1. Turn on your computer.
2.
Press the Standby button on the front control panel.
Your computer’s logon screen or desktop appears on your interactive flat panel.
IMPORTANT
If the Standby button is not amber, either the interactive flat panel is not plugged in or
the main power switch on the bottom connector panel is turned off. To find the main power
switch, see
Connector panels
on page13.
To Next Page
Loading...
