CHAPTER 5
USING YOUR INTERACTIVE FLAT PANEL
20 smarttech.com/kb/170642
To turn off your interactive flat panel
1. Turn off your computer.
2.
Press the Standby button on the front control panel twice.
Resetting your interactiveflatpanel
You can reset your interactive flat panel using the front control panel.
To reset your interactive flat panel
1.
Press the Standby button on the front control panel.
2.
Press and hold the Standby button until the screen turns black.
The interactive flat panel resets and then your computer’s logon screen or desktop appears
on your interactive flat panel.
Using your interactive flat panel with
thecomputer
Users will most often use the interactive flat panel with the computer you set up in the previous
chapter (see
Setting up your interactive flatpanel and computer
on page17).
Using SMART software
The SMART software installed on the computer allows users to do the following:
l Interact with objects on the screen by touching them
l Write, draw and erase digital ink
l Use multitouch gestures to browse pages, zoom in and out, and resize, rotate, group, ungroup
and flick objects
To Next Page
Loading...
