SMART Board 6065 - Chapter 6 Maintaining Your Interactive Flat Panel; Orienting Your Interactive Flat Panel

Chapter 6
23 smarttech.com/kb/170642
Chapter 6: Maintaining your
interactiveflatpanel
Opening SMARTSettings 23
Updating firmware 24
Updating software 24
Orienting your interactive flat panel 24
Calibrating your interactive flat panel 25
Replacing a pen nib 26
Cleaning the screen 26
Cleaning the camera windows and reflective tape 27
Maintaining ventilation 28
Preventing condensation 28
Checking the interactive flat panel installation 29
Removing your interactive flat panel 29
Transporting your interactive flat panel 30
If you properly maintain your interactive flat panel, it will provide years of use.
Opening SMARTSettings
Several maintenance and troubleshooting procedures in this guide require you to open
SMARTSettings.
To open SMARTSettings on Windows 7 operating systems
Select Start > All Programs > SMART Technologies > SMART Tools > SMART Settings.
SMARTSettings appears.