SMART Board 6065 - Page 49

APPENDIX A
USING THE ON-SCREEN DISPLAY MENU
41 smarttech.com/kb/170642
Option Values Function Notes (if any)
Sound
Sound Mode
Treble
L50–R50 Sets the high frequency sound
Bass
L50–R50 Sets the low frequency sound
EQ
120 Hz
0–100 Sets the sound equalization at 120
Hz
500 Hz
0–100 Sets the sound equalization at 500
Hz
1.2 kHz
0–100 Sets the sound equalization at 1.5
kHz
7.5 kHz
0–100 Sets the sound equalization at
5kHz
12 kHz
0–100 Sets the sound equalization at 10
kHz
Balance
L50–R50 Balances the left and right volume
Audio Input
USB
HDMI
Sets the audio input source
Sound Reset
[N/A] Resets all options in the Sound
menu to their default values
OSD
Language
[Languages] Sets the on-screen display menu’s
language
OSD Turn Off
Off
5 seconds
10 seconds
15 seconds
Sets the time of inactivity before the
on-screen display menu turns off
(in seconds)
OSD Reset
[N/A] Resets all options in the OSD menu
to their default values
Setup
Power Save
On
Off
Enables or disables PowerSave
mode
When Power Save mode is enabled
and there isn’t video input, the
interactive flat panel displays
NoSignal for 25 seconds before
turning off.
Don’t change this option from its
default value.
Setup Reset
Restores the setup settings to their
default value