Chapter 1
Welcome
smarttech.com/kb/171555 17
NOTE
For more information about these and other accessories, see smarttech.com/accessories.
SMART OPS PC module
SMART Open Pluggable Specification (OPS) PC modules provide a hassle-free
Windows Pro installation based on Intel® Core™ processors and are designed
specifically to work with a SMART display. All OPS PC modules are WHQL
certified and fully licensed with Windows Pro. Install the OPS PC module in
a display’s accessory slot to provide a complete 4K UHD Windows installation at
your fingertips, without the need for an external PC or additional cables.
Install familiar Windows applications, such as SMARTNotebook®,
SMARTTeamWorks™, and SMARTMeetingPro® software, and access the
internet directly through your display’s network connection. Upgrades and service for the OPS PC module
are easy to perform without removing the display from its mounting.
Stands
If you want to move the display from place to place, you can install it on a SMART mobile stand. If you are
installing the display on a wall that cannot support the display’s full weight, you can install the display on a
SMART floor stand.
USB extenders
As noted in the display’s specifications, there is a maximum length for USB cable connections between the
display and computer.
When using USB 2.0, the cable should be no longer than 16'(5m).
When using USB 3.0, the cable should be no longer than 9'(3m).
Use one of the following USB extenders if you need a longer USB connection:
Extender Specifications
USB-XT smarttech.com/kb/119318
NOTES
l
To extend touch using the SMART CAT 5 USB extender (CAT5-XT-1100) use a touch USB connector
associated with an HDMI 1, HDMI 2, or VGA input. The extender will not function correctly if used to
To Next Page
Loading...
Need help?
General
