SMART MX Series - Appendix B: Adjusting display settings; Exiting the display’s settings; Network

Appendix B
Adjusting display settings
smarttech.com/kb/171555 89
Appendix B: Adjusting display settings
Exiting the display’s settings 89
Network 89
Screen lock 90
Advanced 91
Update 92
Recovery 93
About 93
You can access SMART Board MX series displays’ settings using the Menu button on the front control
panel.
Exiting the display’s settings
Tap Exit
OR
press the Menu button on the front control panel
Network
Option Values Function Notes
Ethernet
Ethernet
Enable
Disable
Enables or disables connecting to a
network with the wired RJ45 jacks
Enabling Ethernet disables Wi-Fi.
Get IP address
automatically
Enable
Disable
The display automatically acquires an
IPaddress from a DHCPserver on
your network
Enabling Wi-Fi hotspot allows you to
connect your mobile device to the
display using Wi-Fi for screen sharing.
Static IPaddress
Enable
Disable
Enter a static IPaddress Use the on-screen keyboard or
connect a USB keyboard to the
Display USB Type-A connector on the
front connector panel to enter
information.
Wi-Fi
Enable
Disable
Enables or disables connecting to a
network wirelessly
Turn on Wi-Fi to discover networks.
Enabling Wi-Fi disables Ethernet.