SMART MX Series Installation And Maintenance Guide

Chapter 2
Installing the display
smarttech.com/kb/171555 30
l
connect an Ethernet cable from a network outlet to the display’s RJ45 IN jack, and then connect
another Ethernet cable from the display’s RJ45 OUT jack to the AM50 appliance’s RJ45 jack
Connecting power and turning on the display for the
first time
The final step in installing and configuring the display is to connect power and turn it on. When you first turn
on the display, a setup wizard appears. Follow the steps in the wizard to complete the setup.
To connect the display to power
Connect the supplied power cable from the AC power inlet on the back of the display to a power outlet.
55" and 65" models 75" models 86" models
NOTE
Refer to the display’s specifications for power requirements and power consumption information (see
More information on page18).

SMART MX Series Specifications

General

Aspect Ratio	16:9
RAM	4 GB
Internal Storage	32 GB
Refresh Rate	60 Hz
Response Time	8 ms
Brightness	350 cd/m²
Contrast Ratio	4000:1
Dimensions (W x H x D)	Varies by screen size
Weight	Varies by screen size
Screen Sizes	65", 75", 86"
Operating System	Android
Connectivity	HDMI, USB, Wi-Fi, Bluetooth
Audio	Built-in speakers
Touch Points	20
Viewing Angle	178°
VESA Mount	Yes
Display Type	LED-backlit LCD