SMART MX Series - SMART software on connected computers isnt working as expected; The SMART OPS PC module isnt working as expected; The Intel Compute Card isnt working as expected; Contacting your reseller for additional support

Chapter 3
Connecting computers and other devices
smarttech.com/kb/171555 46
SMART Board MX series
NOTE
The S/PDIF audio is a fixed-volume output. Adjusting the display’s
volume for its internal speakers does not affect the volume output of
the S/PDIF port.
Connecting room control systems
A room control system enables users to control a room’s lighting, audio system and, possibly, the display.
Some installations may require you to integrate the display with a room control system.
You can use the display’s RS-232 connector to connect a third-party external control system to the display
(see Appendix C: Managing SMARTBoard MX (V3, V2 and V2-C) series displays using RS-232 on page95).
NOTE
Displays are not compatible with centralized remote control systems, such as a universal remote control.
Connector diagrams
SMARTBoard MX (V3) series
Connector panel
The following diagram and table present the connectors on the display’s connector panel: