SMART MX Series Installation And Maintenance Guide

Chapter 2
Installing the display
smarttech.com/kb/171555 32
9. If the display isn’t using a wired network connection, select a wireless network, and then tap Next.
IMPORTANT
The display needs an internet connection for downloading and installing important updates. Ask the
network administrator to confirm that the network has been correctly configured for the iQ
experience.
10. Select the apps you want to appear in the Apps Library, and then tap Next.
11. Tap Finish.
The Welcome screen appears.
OR
The display downloads and applies updates for the firmware and system software.
About energy saving modes
The display features a number of energy saving modes:
l
Networked standby: a low power state in which the display quickly turns on when the Power button
is pressed.
l
Standby: a very low power state in which the display turns on when the Power button is pressed.
Standby is the default energy saving mode for displays set to a location within the EU. Elsewhere,
networked standby is the default energy saving mode. You can select the display's energy saving mode in
Settings > System Settings > Power > Standby (Shutdown) or Settings > System Settings > Power >
Networked Standby (Sleep).

SMART MX Series Specifications

General

Aspect Ratio	16:9
RAM	4 GB
Internal Storage	32 GB
Refresh Rate	60 Hz
Response Time	8 ms
Brightness	350 cd/m²
Contrast Ratio	4000:1
Dimensions (W x H x D)	Varies by screen size
Weight	Varies by screen size
Screen Sizes	65", 75", 86"
Operating System	Android
Connectivity	HDMI, USB, Wi-Fi, Bluetooth
Audio	Built-in speakers
Touch Points	20
Viewing Angle	178°
VESA Mount	Yes
Display Type	LED-backlit LCD