Name: SMART MX Series
Brand: SMART
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chapter 2

Installing the display

smarttech.com/kb/171555 27

Fasten force: 97.36–177.01 in-lb. (11–20 N·m)

CAUTION

Do not over-tighten the bolts.

Installing the display on a stand

If you want to move the display from place to place or if it’s not possible to install the display on a wall, you

can install it on a stand.

Using SMART mobile stands

SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some

models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and lock

for easy movement.

For more information about SMART mobile stands, see smarttech.com/accessories.

Using a third-party stand

For information on selecting and using a third-party stand, see Installing your SMARTBoard MX or MX Pro

on a stand.

For SMARTBoard MX series displays

Installing the iQ appliance and Intel Compute Card

For more information about installing the iQ appliance in SMART Board MX series displays, see the SMART

Board MX series interactive display installation instructions (smarttech.com/kb/171274).

CAUTION

Install the AM50 iQ appliance and Intel Compute Card before you turn on the display for the first time.

IMPORTANT

If you’re installing an AM50 iQ appliance in a display, make sure the display’s firmware is updated to 1.8.7

or later. The display may not function properly if the display’s firmware is not updated. See Updating

firmware for your SMART Board MX.

Other manuals for SMART MX Series

Questions and Answers:

Need help?

Do you have a question about the SMART MX Series and is the answer not in the manual?

General