Name: SMART MX Series
Brand: SMART
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chapter 2

Installing the display

smarttech.com/kb/171555 28

Connecting the Intel Compute Card

With the SBID-MX365, SBID-MX375, and SBID-MX386 models, you can insert an Intel Compute Card in the

slot on the AM50 iQ appliance to access the card’s Windows 10 operating system from the display.

IMPORTANT

Make sure the Intel Compute Card is inserted before you turn on the display.

NOTE

By default, the HDMI output extends the Windows desktop, and this can cause display problems in certain

configurations. If you experience issues, set the HDMI out to a mirrored desktop rather than the default

extended desktop. Right click, select Display settings, and set the secondary display to mirror the first.

TIP

You can connect peripherals, such as a keyboard or mouse, to the Intel Compute Card using the USB

receptacles on the iQ appliance.

Connecting to a network

Before connecting the display, your organization’s network administrators need to configure the network to

allow users to update the display’s firmware automatically and use all the features of the iQ experience. See

Configuring your organization’s network for a SMARTdisplay with the iQ experience.

The display requires a network and internet connection for downloading software and firmware updates,

and a number of the iQ apps require a network connection as well. You can connect to a network using Wi-

Fi or one of the RJ45 jacks.

SMARTBoard MX (V3) series SMARTBoard MX

(V2 and V2-C) series

SMARTBoard MX series

Other manuals for SMART MX Series

Questions and Answers:

Need help?

Do you have a question about the SMART MX Series and is the answer not in the manual?

General