SMC Networks EXW1-BMJA Series User Manual

-54-
No.EX※※-OMZ0016
Click [Reset] and [Refresh] and check that the registration status changes to "registered".
* The example below shows two Remote modules registered on CH1 and CH2.
Configure the registration of the dummy Remote as necessary.
(4) Disable the Pairing enabled mode of the Base (Pairing disabled mode)
Set the Base to Pairing disabled mode and click [Reset].
Base setting screen
(1)
(2)
Base setting screen

SMC Networks EXW1-BMJA Series Specifications

General

Brand	SMC Networks
Model	EXW1-BMJA Series
Category	I/O Systems
Language	English