SMC Networks PFCA7 Series User Manual

-41-
No.PF※※-OMA1002
■[F81 PIN code] PIN code settings
Set the PIN code used for the key lock function.
<Operation>
Operate the UP or DOWN button in function selection mode to select [F81 PIN code].
Press the SET button. Shifts to the PIN code setting.
OFF: PIN code is not used.
ON: Shifts to the PIN code setting.
Press the SET button.
Press the SET button.
Completion of the [F81 PIN code] PIN code setting
PIN code setting
Press the UP or DOWN button
to select an item.
When [OFF] is selected:
Press the SET button to return
to function selection mode.
When [ON] is selected:
Press the SET button to move on
to checking the PIN code setting.
Checking the PIN code
setting
Press the UP or DOWN
button to enter the
current PIN code.
(The factory default
setting is 000.)
Entering a new PIN code
Press the UP or DOWN
button to enter a new PIN
code.
If the PIN code entered is incorrect, [PIN mismatch] will be
displayed, and the PIN code must be entered again.
If the wrong PIN code is entered 3 times, [Failed 3 times] is
displayed and the device returns to function selection mode.
Returns to function
selection mode.
2023-12-20 14:49
DL145266

SMC Networks PFCA7 Series Specifications

General

Brand	SMC Networks
Model	PFCA7 Series
Category	Controller
Language	English