SMC Networks PFCA7 Series - Output Signal Check (F98); Normal Output Signal Status

-44-
No.PF※※-OMA1002
■[F98 Output check] Checking output signal
The operation of the system can be checked by forcibly switching the output ON/OFF operation without
applying the flow rate.
<Operation>
Operate the UP or DOWN button in function selection mode to select [F98 Output check].
Press the SET button. Shifts to the settings of each item.
Normal output
Press the SET button.
Page 1
Page 2
Page 3
Press the SET button on one of the pages.
Returns to the [F98 Output check] output signal check.
Check the current output signal.
Select Normal.
2023-12-20 14:49
DL145266