SMC Networks PFCA7 Series User Manual

-51-
No.PF※※-OMA1002
[Key-Lock Setting Mode] to Limit Button Operations
What is key-lock mode?
In key-lock mode, settings other than those for key-lock operations cannot be changed. The key lock
function is used to prevent errors occurring due to unintentional changes of the set values.
In measurement setting mode, press the SET button for between 2 and 4 seconds, and then select
[Key lock] to enter Key-lock setting mode.
Press the SET button.
Press the SET button.
Returns to function selection mode.
(Do not use key-lock mode.)
Returns to function selection mode.
Completion of the key-lock setting
: An icon appears in the lower left in key-lock mode.
: When the SET button is pressed or a reset operation is performed, [Status: Lock] is displayed and
the operation is disabled.
Select [Unlock] and
press the SET button.
Select [Lock] and
press the SET button.
Press the SET button for between
2 and 4 seconds.
2023-12-20 14:49
DL145266

SMC Networks PFCA7 Series Specifications

General

Brand	SMC Networks
Model	PFCA7 Series
Category	Controller
Language	English