SMC Networks PFCA7 Series - Local Control Start Time Setting

-50-
No.PF※※-OMA1002
Time to start local control operation
Press the SET button.
: Setting of the time from transition to measurement mode after turning on the power supply to the start of control operation.
Local control operation start time setting range: 0.00 to 60.00 [s]
Press the SET button.
Select [Back] and press and hold the SET button for 2 seconds or longer
to enter function selection mode.
Press the UP or DOWN button to
change the value.
Select [CtrStart].
2023-12-20 14:49
DL145266