SMC Networks PFCA7 Series - System Settings (F0); Fluid Type Configuration

-24-
No.PF※※-OMA1002
■[F0 System] System settings
Set the following items:
(1) Fluid
(2) Reference condition
(3) Display units
(4) Switching between NPN and PNP output
(5) IO-Link enable/disable
(6) Output PD setting at communication error
<Operation>
Press the UP or DOWN button in function selection mode to select [F0 System].
Shifts to the settings of each item.
(1) Fluid settings
Press the SET button.
Air: Dry air, Nitrogen
Argon: Argon
CO
2
: Carbon dioxide
Press the SET button.
Returns to the [F0 System] settings.
Press the UP or DOWN button
to select an item.
Press the UP or DOWN button to select
the item and then press the SET button.
Select [Fluid].
2023-12-20 14:49
DL145266