■Do not touch the terminals and connectors while the power is on.
Otherwise electric shock, malfunction and damage to the product can result.
■After maintenance is complete, perform appropriate functional inspections and a leak test.
Stop operation if the equipment does not function properly or there is leakage of fluid.
When leakage occurs from parts other than the piping, the product might be faulty.
Cut off the power supply and stop the fluid supply.
Do not apply fluid if the system is leaking.
Otherwise, an unexpected malfunction may occur and safety cannot be assured.
■Precautions for Handling
○Follow the instructions given below for the selection and handling of the product.
●The instructions on selection (installation, wiring, environment, adjustment, operation, maintenance, etc.)
described below must be followed.
Product specifications
•This product is not suitable for applications to shut off the flow rate completely.
If it is necessary to shut off the flow rate completely, install a stop valve, etc. separately.
•Use within the specified voltage.
Otherwise failure or malfunction can result.
•For details of the compressed air quality, refer to JIS B 8392-1 1.6.2.
•Use within the specified flow rate and pressure range.
•Reserve a space for maintenance.
Design the system to allow the required space for maintenance.
To Next Page
Loading...
Need help?
General
