For your safety, read this manual thoroughly
before operating the Model EEWB330A Wheel Balancer
The Model EEWB330A Wheel Balancer is intended for use by properly trained auto-
motive technicians. The safety messages presented in this section and throughout the
manual are reminders to the operator to exercise extreme caution when servicing tires
with these products.
There are many variations in procedures, techniques, tools, and parts for balancing
tires, as well as the skill of the individual doing the work. Because of the vast number of
wheel and tire applications and potential uses of the product, the manufacturer cannot
possibly anticipate or provide advice or safety messages to cover every situation. It is
the automotive technician's responsibility to be knowledgeable of the wheels and tires
being serviced. It is essential to use proper service methods in an appropriate and
acceptable manner that does not endanger your safety, the safety of others in the work
area or the equipment or vehicle being serviced.
It is assumed that, prior to using theModel EEWB330A Wheel Balancer, the operator
has a thorough understanding of the wheels and tires being serviced. In addition, it is
assumed he has a thorough knowledge of the operation and safety features of the rack,
lift, or floor jack being utilized, and has the proper hand and power tools necessary to
service the vehicle in a safe manner.
Before using the Model EEWB330A Wheel Balancer, always refer to and follow the
safety messages and service procedures provided by the manufacturers of the equip-
ment being used and the vehicle being serviced.
IMPORTANT !! SAVE THESE INSTRUCTIONS -- DO NOT DISCARD !!
SAFETY INFORMATION
To Next Page
Loading...
Need help?
General
