1.0 INTRODUCTION
Congratulations on purchasing the EEWB330A handspin wheel balancer. This wheel balancer is de-
signed for ease of operation, accuracy, reliability and speed. With a minimum of maintenance and care
your wheel balancer will provide many years of trouble-free operation.
Instructions on use, maintenance and operational requirements of the machine are covered in this
manual.
STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
READ THIS MANUAL THOROUGHLY BEFORE USING THE MACHINE.
1.1 SAFETY NOTICE
This manual is a part of the balancer product.
Read carefully all warnings and instructions of this manual since they provide important information
concerning safety and maintenance.
1.2 BALANCER APPLICATION
The Snap-on wheel balancer model EEWB330A is intended to be used as equipment to balance car, and
light truck wheels within the following range:
Maximum wheel diameter : 42” (1067mm)
Maximum wheel width : 20” (508mm)
Maximum wheel weight : 120lbs (54 kg)
This equipment is to be only used in the application for which it is specifically designed.
Any other use shall be considered as improper and abusive.
The manufacturer shall not be considered liable for possible damages caused by improper, wrong, or
abusive use of this equipment.
To Next Page
Loading...
Need help?
General
