SNBC BTP-2002NP - Printing and Cutting Position

BTP-2002NP User’s Manual
2.5 Printing and Cutting Position
2.5.1 Printing Position
L1: Paper cabinet width 83.5mm
L2: Max Print width 80mm
L3: Space between the left end of print head and the left side of paper roll supply device (non-changeable)
1.75±0.3mm
L4: Space between the right end of print head and the right side of paper roll supply device (non-changeable)
1.75±0.3mm
L5: Left margin changeable, default is 7mm
L6: Print area width changeable, default is 64mm
L7: Right margin changeable, default is 9mm
2.5.2 Cutting Position
L1: Approximate: 16mm L2: Approximate: 34mm
- 6 -