BTP-2002NP User’s Manual
6.6 WLAN interface
Item Content
Standard
802.11b、802.11g
Communication Speed (Max) 54M
Transmission Distance (Max)
100m (Indoors without obstructs)(the distance depending on the
environment)
channel 1-14
Wireless
Safety
64/128 WEP、WPA
Condition’s monitor
Special configure tools
Browser
Configuration management
Special configure tools
Browser
Firmware updating TFTP
Basic communication protocol
ARP、RARP、IP、ICMP、TCP、UDP
The interface
module
Printing communication mode
Port 9100、LPR/LPD
State demand
The software package (includes DLL and routines)、browser
The printer
Average communication speed
＞50kByte/s
The functions of the WLAN interface module
6.7 Signal Definition of Power Connector
1 --- Positive (+24V)
2 --- GND
3 --- NC.
6.8 Cash Drawer Kick-out Connector
1) Electrical characteristics
¾ Driving voltage: DC 24 V
¾ Driving current: Max 0.8 A (Within 510 ms)
¾ SW signal: Signal level “L” = 0 to 0.5 V “H” = 3 to 5 V
Cash drawer connector
socket is RJ-11 6P connector
2) Signal definition
Pin No. Signal Function
1 FG Frame ground
2 DRAWER 1 Cash drawer 1 drive signal
3 DRSW Cash drawer status detect signal
4 VDR Cash drawer drive power supply
5 DRAWER 2 Cash drawer 2 drive signal
6 GND Common ground on circuits
- 18 -
To Next Page
Loading...
