This document can not be reproduced or released without the Sodikart authorization.
MAN.SIG.EN.02
04/2014
29
USE SPARE PARTS OF SODI ORIGIN
User maintenance guide
●● We●recommend●that●you●drain●and●rell●the●
brake●circuit●after●every●brake●pad●change.●
This●will●allow●you●to●maintain●optimum●
braking●performance.
●● To●bleed●your●brake●system●more●
rapidly,●especially●for●a●big●eet,●we●
recommend●the●priming●system●SODIKART●
(Ref.●OU951.002).
●● Store●the●used●brake●uid●in●labelled●
containers●until●it●is●collected●by●a●specialist●
waste●disposal●company.
●● The●brake●liquid●doesn’t●contain●petrol,●so●
never●pour●the●liquid●into●a●using●oil●tank.
●● Brake●uid●absorbs●water●Make●sure●the●
replacement●brake●uid●comes●from●a●
container●that●has●been●stored●in●good●
conditions●and●is●recent.
●● Check●that●the●pedal●is●rm●after●each●
bleed.
► An air bubble in the brake system can
lead to a partial or total lost of brakes
and may lead to a serious or even fatal
injury.
► Leaks in the brake system may lead to a
serious or even fatal injury.
► Moisture in the brake uid may cause
vapour lock and a sudden loss of
braking power, may lead to a serious or
even fatal injury.
► Use brake uid DOT 4 only
► Test the brake after each bleed.