Sodi Sigma DD2 - Tooling for Assembly and Adjustment; Maintenance Products

This document can not be reproduced or released without the Sodikart authorization.
MAN.SIG.EN.02
04/2014
7
USE SPARE PARTS OF SODI ORIGIN
User maintenance guide
2.1 - Tooling for assembly and adjustment
2
1
5
7
7
7
4
6 9
8
3
Designation Ø Part No.
1 Stub axle spacer adjuster
(Hub) (*)
- OU931.007
2 Stub axle screw adjuster
(Stub axle) (*)
- OU931.006
3 Key for slotted round nut (*) M20 OU914.003
4 T handle wrench Allen key 3 OU911.001
4 T handle wrench Allen key 4 OU911.002
4 T handle wrench Allen key 5 OU911.003
4 T handle wrench Allen key 6 OU911.004
4 T handle wrench Allen key 8 OU911.005
5 T handle socket spanner 8 OU912.004
5 T handle socket spanner 10 OU912.001
5 T handle socket spanner 11 OU912.002
5 T handle socket spanner 13 OU912.003
6 Piston stop centring device - OU951.004
7 Master cylinder tool kit - OU951.003
8 Brake bleeder - OU951.002
9 Special glue - LU861.001
● (*) Supplied with the chassis.
2.2 - Maintenance products
Designation Part No.
Cleaner : (paint - plastics) LU834.003
WD 40 LU833.003
Grease (for chain) LU825.005
● For other tools, accessories and
equipment, visit ITAKA website.