HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
Burning due to hot housing
While the inverter is being operated, several internal
components will become very hot.
Please wear protective gloves!
Keep children away from the device!
2.1.6 Repair and maintenance
Dangerous voltage!
Before carrying out any repair work, first switch off the
AC circuit breaker between the inverter and power grid,
and then the DC switch.
After switching off the AC circuit breaker and the DC
switch, wait a minimum of 5 minutes before starting
any maintenance or repair work.
Unauthorized repairs!
Following the elimination of any faults, the inverter
should be fully functional once more. Should any
repairs be required, please contact a local authorized
service centre.
The internal components of the inverter must NOT be
opened without the relevant authorization. Shenzhen
SOFARSOLAR Co., Ltd. assumes no responsibility for
any resulting losses or defects.
To Next Page
Loading...
