HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
4 Installation
4.1 Installation information
Fire hazard
Do NOT install the inverter on flammable material.
Do NOT install the inverter in an area in which
flammable or explosive material is stored.
Burning hazard
Do NOT install the inverter in places where it can be
accidentally touched. The housing and heat sink may
become very hot while the inverter is being operated.
Weight of the device
Take into account the weight of the inverter when
transporting and moving it.
Choose a suitable installation location and surface.
Commission a minimum of two persons for the
installation of the inverter.
Do not set down the inverter overhead.
4.2 Installation procedure
Mechanical installation is performed as follows:
1. Examine the inverter before installation
2. Prepare the installation
3. Select an installation location
4. Transport the inverter
5. Mount the rear panel
6. Install the inverter
To Next Page
Loading...
