inverter's system settings, for example:
System Settings – Input Channel Config – Bat Channel2 –
Not Used.
The battery inputs of different inverters should not be
connected in parallel
Each battery tower corresponds to a unique battery
address. “Auto Config. Address” will detect the number
and addresses of the connected batteries automatically
within 2-3 Minutes.
In certain regions there are specific local safety
requirements of the power grid. Ensure to comply with
all local safety requirements.
According to the Australian safety regulations, the
neutral cables on the grid-connected side and EPS side
must be connected together. Otherwise the EPS cannot
be used.
To Next Page
Loading...
