HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
8.3.1 Cleaning the inverter
Clean the inverter using an air blower and a dry, soft cloth or a
soft bristle brush. Do NOT clean the inverter with water,
corrosive chemicals, cleaning agents etc.
8.3.2 Cleaning the heat sink
In order to help guarantee correct long-term operation of the
inverter, make sure that there is sufficient space for ventilation
around the heat sink. Check the heat sink for blockages (dust,
snow etc.) and remove them if present. Please clean the heat
sink using an air blower and a dry, soft cloth or a soft bristle
brush. Do NOT clean the heat sink with water, corrosive
chemicals, cleaning agents etc.
To Next Page
Loading...
