HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
2.2.1 Symbols on the inverter
Several symbols pertaining to safety can be found on the
inverter. Please read and understand the content of these
symbols before starting the installation.
Residual voltage is present in the inverter! Before
opening the inverter, you should wait five minutes
to ensure that the capacitor has been fully
discharged.
Caution! Danger through electric shock
The product is compliant with EU guidelines
Please read the manual before installing the
inverter
Device degree of protection according to EN 60529
Positive and negative poles of the DC input voltage
The inverter must always be transported and
stored with the arrows pointing upward
RCM (Regulatory Compliance Mark)
The product meets the requirements of the
applicable Australian standards.
To Next Page
Loading...
