HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
Figure. 5-6 Connecting PGND cable(a)
L2 is 2 to 3 mm longer than L1
2. Crimp the cable to the ring terminal:
Figure. 5-7 Connecting PGND cable(b)
3. Install the crimped ring terminal and the washer with
the M6 screws and tighten these with a torque of 3 Nm
using an Allen key:
Figure. 5-8 Connecting PGND cable(c)
To Next Page
Loading...
