HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
within the manual. For safety reasons, this inverter may only be
installed by a qualified electrician who:
- has received training on occupational safety, as well as the
installation and commissioning of electrical systems
- is familiar with the local laws, standards and regulations of
the grid operator.
SOFAR assumes no responsibility for the destruction of property
or any injuries to personnel caused by improper usage.
2.1.2 Installation requirements
Please install the inverter according to the information
contained in the following section. Mount the inverter to a
suitable object with a sufficient load-bearing capacity (e.g. walls,
PV frames etc.) and ensure that the inverter is upright. Choose a
suitable place for the installation of electrical devices. Ensure
that there is sufficient space for an emergency exit which is
suitable for maintenance. Ensure sufficient ventilation in order
to guarantee an air circulation for the cooling of the inverter.
2.1.3 Transport requirements
The factory packaging is specifically designed to prevent
transport damage, i.e. violent shocks, moisture and vibrations.
However, the device must not be installed if it is visibly
damaged. In this case, notify the responsible transport company
immediately.
2.1.4 Label on the device
The labels must NOT be concealed by items and foreign objects
(rags, boxes, devices, etc.); they must be regularly cleaned and
kept clearly visible at all times.
Observe all applicable electrical regulations when working with
the Solar inverter.
To Next Page
Loading...
