What does it mean if my SolarMax Inverter displays 'Temp. limitation'?
If your SolarMax Inverter displays 'Temp. limitation', it indicates that the internal temperature is too high, and the device is reducing output. Check the function of the external fan, and inspect and clean the fan grille.
What to do if the display on my SolarMax Inverter remains blank?
If the display on your SolarMax Inverter is blank, there are several potential causes. First, ensure the DC insulation switch is turned on. If it is, check if the irradiance is too low and wait until it increases. Also, verify that the strings are properly connected to the PV generator. If none of these solutions work, it could indicate an internal failure.
Why does the status LED flash orange on my SolarMax 6000S Inverter?
If the status LED on your SolarMax Inverter is flashing orange, it could be due to temperature limitations. Try cleaning the fan grids and improving ventilation in the operations room.
Why does the graphics display flash periodically on my SolarMax Inverter?
The graphics display on your SolarMax Inverter might be flashing periodically because the irradiance is too low. Wait until the irradiance is high enough.
Manual purpose, accessibility, and explanation of symbols.
Defines intended use and highlights critical safety warnings for user protection.
Details technical configurations for different SolarMax S series models.
Covers integrated safety functions and key control features like MPPT.
Illustrates and describes external controls and physical dimensions.
Guidelines for transport, storage, and choosing an installation site.
Details site requirements, clearances, and ventilation for installation.
Covers ambient conditions, cooling, lightning protection, and scope of delivery.
Provides step-by-step instructions for installing the inverter.
Safety guidelines and identification of all connection ports on the inverter.
Details built-in surge protection and earthing requirements.
Explains fault sensor, RCDs, and requirements for AC mains connection.
Details mains fuse recommendations and AC connector wiring.
Instructions for connecting DC feed lines from the PV plant.
Explains connection and functionality of the optional status signalling contact.
Details specifications, pinout, and contact diagram for the status contact.
Instructions for connecting RS485 and Ethernet communication cables.
Checks before startup and step-by-step guide for initial setup.
Details country-specific settings like "Plant type" and "Standard".
Explains switch function and steps for turning the inverter on.
Procedure for shutdown and how to navigate the graphics display.
Explains the function of each button symbol for menu navigation.
Visual representation of the inverter's menu hierarchy and navigation.
Describes the main menu and the default overview display.
Details accessible measured values and their meaning.
Accessing the inverter's data logger for daily statistics.
Accessing historical data logs for monthly and yearly performance.
Viewing cumulative data and resetting statistics.
Lists available parameters for inverter configuration.
Lists parameters for power reduction and reactive power control.
How to access and edit settings like language, time, and device address.
Accessing device info, firmware, and initiating the auto test procedure.
Detailed steps and expected results for the auto test procedure.
Displays auto test results and return to normal operation.
Introduces the MaxComm platform and its products for data monitoring.
Settings for Ethernet, IP address, Netmask, and TCP Port.
Lists available accessory components like MaxMeteo and MaxCount.
Explains LED indicators and status messages for inverter operation.
Details status messages during the booting process.
Describes status messages and symbols for mains operation.
Initial steps for malfunctions and how to contact service.
Common problems, causes, solutions, and specific warnings.
Lists common failures and corrective steps.
Addresses device errors, blockings, and initialization phase faults.
Operator tasks for maintenance and steps for safe device removal.
Instructions for disposing of the inverter according to regulations.
Technical specifications for input/output values and efficiency metrics.
Specs on display, data logger, interfaces, dimensions, and warranty.
Presents efficiency curves and data tables for 2000S and 3000S models.
Provides efficiency curves and data tables for 4200S and 6000S models.
Explains how ambient temperature affects output for SM2000S and other models.
Visual representation of temperature-dependent output reduction.
SM6000S derating curve and country-specific parameter tables start.
Details country-specific parameter tables for various regions.
Details warranty coverage, duration, and common exclusions.
Lists cases where the guarantee doesn't apply and legal provisions.
Confirms product conformity to EMC and Low Voltage Directives.
Lists contact details for the SolarMax Service Center worldwide.
General| Model | SolarMax 6000S |
|---|---|
| Rated Output Power | 6000 W |
| Max. DC Power | 6600 W |
| Max. Input Voltage | 1000 V |
| Rated AC Voltage | 230 V |
| Weight | 25 kg |
| Protection Class | IP65 |
| Output Voltage | 230V |
| Frequency | 50/60 Hz |
| Input Voltage Range | 200V - 800V |
| AC Voltage Range | 180V - 280V |
| Protection Features | Overvoltage, Overcurrent, Short Circuit |
To Next Page
