18
10. Insert the SIM card into the card holder and lock it.
11. Replace the lid on the MaxWeb xp and screw it down tightly.
12. Switch MaxWeb xp on (see Section 6.1).
13. Wait until the “OH” LED is lit continuously (sequence: blinking – ashing – continu-
ous). This process may take up to one minute.
MaxWeb xp is now connected with the GPRS network.
Establishing the connection with MaxWeb xp
14. Remove the red Ethernet cable from the “Modem” socket and plug it into the “Eth-
ernet” socket of MaxWeb xp.
15. Enter “http://192.168.1.234” in the web browser. The MaxWeb xp login screen will
appear.
16. Enter “admin” as user name and “solarmax.com” as password and click “OK” in
order to log into MaxWeb xp. The start-up screen of the MaxWeb Wizard appears.
17. Continue with the conguration in accordance with Section 6.5.
To Next Page
Loading...
