Solcon RVS-DX Series User Manual

36 • Control Keypad
________________________________________________________________________________________
It is recommended that for all standard applications (not pumps), Stop Curve 0 will be used.
To reduce Water Hammer select STOP CURVE 1, than 2 or 3, if necessary.
Curve 4 - Torque Curve - Provides linear deceleration of the torque. In certain loads, linear torque
deceleration can result in close to linear speed deceleration.
The RVS-DX Torque Control does not require any external torque or speed sensor (tacho-gen. etc.).

Solcon RVS-DX Series Specifications

General

Brand	Solcon
Model	RVS-DX Series
Category	Controller
Language	English