Solcon RVS-DX Series User Manual

41 • Control Keypad
___________________________________________________________________________________________
FAULT PARAMETERS
- **** -
Displays in MAXIMIZED MODE only
(refer to section 7.6.3 on page 27 for changing mode)
Display and default
values
Range
Description
Remarks
CURRENT
RESET time
delay.
page 27 for details on adjusting UNDER
CURRENT TRIP)
To start the motor after UNDER CURRENT
fault has disappeared, stop the START signal
to terminal B1 and recommence the signal to
terminal B1.
A time delay (After START signal is stopped)
can be programmed to activate the UNDER
CURRENT RESET time.
STORE ENABLE
FAULT PARAMETERS
Same as STORE ENABLE MAIN
PARAMETERS on page 29.

Solcon RVS-DX Series Specifications

General

Brand	Solcon
Model	RVS-DX Series
Category	Controller
Language	English