Solid State Logic AWS 900+ User Manual

Master Control Panel
AWS 900+ Owner’s Manual
5-5
The Default Button
Faders, pans and sends can be reset to their default values using the DEFAULT button:
Resetting Pans
Select the PA N button on the Master Control Panel, and all 24 D-Pots become pan controls. Hold the DEFAULT
button while pressing the D-Pot on the channel you wish to reset. Hold down OPTION and press DEFAULT to
perform a reset across all pans.
Resetting Faders
Hold the DEFAULT button while pressing the (SELECT) SEL button on the channel you wish to reset. Hold
down OPTION and press DEFAULT to perform a reset across all faders.
Resetting Sends
Select the SEND button on the Master Control Panel. Turn the Master D-Pot to scroll through the list of available
sends. Hold the DEFAULT button while pressing the channel D-Pot on the channel you want to reset. Hold down
OPTION and press DEFAULT to perform a reset across all sends.
Resetting Plug-ins
Hold the DEFAULT button and press COMPARE (the Plug-In Editor function).The plug-in default value is either
the factory setting or user setting determined within the DAW.
7

Solid State Logic AWS 900+ Specifications

General

Brand	Solid State Logic
Model	AWS 900+
Category	DJ Equipment
Language	English