Solid State Logic SSL UF1 User Manual

Pro Tools Tutorial
35
SSL UF1 User Guide
V-Pot Assignments
When working in the General DAW and DAW Faders modes, the Soft Keys along the top of UF1 allow you to access various V-Pot
assignment modes such as Pan and Sends.
Pan
Set the V-Pots to control the PAN position of the channel. Clicking the V-Pot will return Pan to the centre position. For Stereo
channels, the PAN position affects the Left channel but this can be changed to control the right channel being selected by pressing
the PAN key again to control the right. The PAN soft key will flash to indicate it is operating on the right-hand side and the V-Pot
Assignment text in the centre of the screen will show PANR . Simply press the PAN key again to return to controlling the left-hand
side.
Fine
Press and hold the FINE key whilst turning a V-Pot that is controlling Pans or Sends, to operate in a fine resolution. Whilst operating
in fine mode, a numeric value readout is also shown on-screen.
If you prefer the FINE behaviour and would like FINE mode to be engaged automatically every time you turn a V-Pot
in Pan or Send modes, you can enable the 'Always Fine Pan' and/or 'Always Fine Sends' in SSL 360°, on the UF1
page under ADVANCED settings.

Solid State Logic SSL UF1 Specifications

General

Brand	Solid State Logic
Model	SSL UF1
Category	DJ Equipment
Language	English