Pro Tools Tutorial
37
SSL UF1 User Guide
Sends - Mute
Engaging the MUTE key (Soft Key Page 3, 2nd Key) will allow you to control send mutes. On the channel shown on the fader
strip, you can use the soft key above the small display to do this. On the channels shown across the large display, the V-Pot push
function will control send mutes.
1 - Engaging the SEND MUTE key allows send mutes to be controlled.
2 - Small LCD Soft Key - press to toggle send mute on/off for the channel on the fader strip.
3 - Large LCD V-Pots - push the V-Pots beneath the large screen to control send mutes on these channels.
1
2
3