Solid State Logic SSL UF1 User Manual

Cubase/Nuendo Tutorial
66
SSL UF1 User Guide
Example - Controlling Sends
It is beyond the scope of this User Guide to cover all of the different V-Pot assignment modes within the Cubase MCU implementation,
however an example of controlling Sends is presented below.
Send Settings - Selected Channel
• Select the channel you wish to control by pressing the SEL key on the track assigned to the UF1 fader..
• Press the FX SEND key. This mode allows you to control all the Send parameters for the currently selected track using the
V-Pots - e.g. all the Send levels on the selected track.
• Use the PAGE < > keys to move between parameter pages.
1. Select the track
you wish to control
by banking it onto the
fader and pressing
the SEL key
Cubase MCU
Page Number
is shown here
Selected Track
name is shown
here
2. Select the V-Pot
mode from one
of the Soft Keys
above the options
in the Large LCD
Screen.
3. Use the PAGE < > Keys to bank though pages of parameters available for the V-Pot Assignment mode.

Solid State Logic SSL UF1 Specifications

General

Brand	Solid State Logic
Model	SSL UF1
Category	DJ Equipment
Language	English