Solo 694 User Manual

100 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

Gebrauchsanweisung Motorsäge (page 2-25)

Instruction Manual Chain Saw (page 26-49)

9 694 100

Achtung! Lesen Sie vor der ersten Inbetriebnahme

diese Gebrauchsanweisung gründlich durch und

befolgen Sie unbedingt die Sicherheitsvorschriften!

Gebrauchsanweisung sorgfältig aufbewahren!

Important! Read this Instruction Manual carefully

before putting the chain saw into operation and strictly

observe the safety regulations!

Keep this Instruction Manual!

694

Achtung!

Diese Motorsäge Typ 694 ist im Auslieferungszustand für

eine Schneideinrichtung mit .404" Teilung ausgerüstet.

Bei Verwendung einer 3/8" Ausrüstung ist das Power-

mate-Ringritzel auf den im Lieferumfang enthaltenen

3/8" Power-mate-Ring umzubauen!

Important!

This Type 694 chain saw is supplied with a chain with.404"

spacing. If using 3/8" spacing, switch the Power-mate

ring gear to the supplied 3/8" Power-mate ring!

Table of Contents

Questions and Answers:

M
Mike GarciaJul 31, 2025
What to do if my Solo 694 Chainsaw engine does not start or starts with difficulty?
- J
  John BellJul 31, 2025
  If your Solo Chainsaw engine is having trouble starting, the issue could stem from the fuel supply, compression, or a mechanical problem. Here's what you can do: Check the ignition spark, make sure the fuel tank is full, and inspect the STOP switch. Also, look for any malfunctions or short circuits in the cabling, plug cap, spark plug, or ignition module. Ensure the choke is in the correct position. Finally, inspect the carburetor, suction head, fuel line, and engine parts for any issues.
M
Matthew HuffAug 4, 2025
Why is there no chain lubrication on my Solo 694?
- L
  Laura Mckenzie DDSAug 4, 2025
  If there is no chain lubrication on your Solo Chainsaw, the oil tank might be empty. Refill the oil tank to solve this issue.
A
Alison JensenAug 8, 2025
How to fix warm start difficulties with Solo Chainsaw?
- L
  Lawrence MurrayAug 8, 2025
  If you're experiencing warm start difficulties with your Solo Chainsaw, it could be due to a wrong carburetor adjustment. Adjust the carburetor to resolve this issue.
P
Patricia RileyAug 12, 2025
Why is there no oil on the chain of my Solo 694?
- P
  Patrick MitchellAug 13, 2025
  If there is no oil on the chain of your Solo Chainsaw, it might be because the oil guide groove is dirty. Cleaning the oil guide groove should solve the problem.
S
Sandy FigueroaAug 17, 2025
Why does my Solo 694 Chainsaw have insufficient output?
- C
  Caleb SandersAug 17, 2025
  Insufficient output from your Solo Chainsaw can be caused by several factors. The air filter might be dirty, the carburetor could be improperly adjusted, the muffler might be clogged, the exhaust channel in the cylinder could be blocked, or the spark arrester screen might be clogged. To resolve this, clean or replace the air filter, adjust the carburetor, and remove any clogs from the muffler, exhaust channel, or spark arrester screen.
L
lwilsonAug 21, 2025
What to do if my Solo Chainsaw engine starts, but dies immediately?
- E
  eatonjenniferAug 21, 2025
  If your Solo Chainsaw engine starts and then immediately dies, the problem could be due to an incorrect idling adjustment or a dirty suction head or carburetor. To fix this, adjust the idling and clean the suction head and carburetor.
R
rebeccapenaAug 26, 2025
What to do if the chain does not run on my Solo Chainsaw?
- R
  Ralph ChurchAug 26, 2025
  If the chain does not run on your Solo Chainsaw, it is possible that the chain brake is actuated. Release the chain brake to allow the chain to run.

Solo 694 Specifications

General

Brand	Solo
Model	694
Category	Chainsaw
Language	English

Summary

Safety Precautions

General Precautions

Summary of safe operation rules and user responsibilities.

Protective Equipment

Details on mandatory head, eye, hand, and foot protection.

Fuels / Refuelling

Kickback

Explanation and prevention methods for dangerous kickbacks.

Working Behavior/Method of Working

Safe operating techniques and situational awareness.

First Aid

Putting Into Operation

Mounting the Guide Bar and Chain

Step-by-step instructions for assembling the guide bar and chain.

Tightening the Chain

Procedure for achieving and maintaining correct chain tension.

Checking the Chain Tension

Method to verify the chain is correctly tensioned.

Chain Brake

Explanation of the inertia chain brake and its operation.

Adjusting the Chain Lubrication

Steps to regulate the oil flow to the chain and guide bar.

Starting the Engine

Instructions for initiating the engine, covering cold and warm starts.

Checking the Safety Chain Brake

Procedure to test the functionality of the safety chain brake.

Checking the Chain Lubrication

Adjusting the Carburetor

Working in Winter

Maintenance

Sharpening the Saw Chain

Guide to correctly sharpening the chain's cutting edges.

Cleaning the Guide Bar

Clean the Chain Brake Band

Checking the Sprocket

Replacing the Sprocket

Replacing/Cleaning Spark Arrester Screen

Replacing Starter Cable

Cleaning Air Filter

Replacing Spark Plug

Checking Ignition Spark

Instructions for Daily and Periodic Maintenance

General Work

Before Each Start

Every Day

Guarantee

Troubleshooting

Related product manuals

Preview: Solo 636

Solo Farmer 631