48
Extract from the spare parts list
Use original SOLO spare parts only. For performance of repairs and replacement
of other parts your SOLO service center should be consulted.
Pos. SOLO No. Qty. Denomination
3/8"
2 6900370 1 Sprocket nose bar 50 cm (20")
6900372 1 Sprocket nose bar 60 cm (24")
6900937 1 Sprocket nose bar 70 cm (28")
3 6900371 1 Saw chain 3/8" for 50 cm (20")
6900373 1 Saw chain 3/8" for 60 cm (24")
6900941 1 Saw chain 3/8" for 70 cm (28")
.404"
2 6900479 1 Sprocket nose bar 60 cm (24")
1 6900482 1 Solid nose bar 70 cm (28")
6900890 1 Solid nose bar 80 cm (32")
3 6900481 1 Saw chain 404" for 60 cm (24")
6900484 1 Saw chain 404" for 70 cm (28")
6900891 1 Saw chain 404" for 80 cm (32")
5 952 100 153 1 Chain protection, 20-24"
952 100 171 1 Chain protection, 29"
6 024 112 300 1 Starter device cpl.
7 00 63152 25 1 Starter cable ø 4x1050 mm
8 965 402 262 1 Starter grip
9 020 163 031 1 Return spring
10 024 173 230 1 Air filter (Robkoflok)
11 23 00 389 1 Spark plug
12 010 114 050 1 Oil tank cap cpl.
13 963 228 030 1 O-Ring 28x3
15 024 174 020 3 Special screw M6
16 965 525 101 1 Gasket
17 024 174 153 1 Muffler
18 024 174 160 1 Spark arrester screen
18a 024 174 171 1 Deflector plate
19 915 142 090 1 Self-tapping screw 4,2x9,5
20 965 551 250 1 Housing
21 965 403 430 1 Vibration damper
22 965 403 461 4 Vibration damper
23 913 455 204 4 ✪ Socket-head-screw M5,5x20
24 965 404 740 4 Plug
25 024 223 041 1 Clutch drum
26 962 210 024 1 Needle cage
27 30 38 399 1 Sprocket 3/8", Z=7
27 30 38 398 1 Sprocket .404", Z=7
28 001 224 011 1 Thrust washer
29 927 308 000 1 Locking washer
30 024 213 460 1 Sprocket guard cpl.
36 00 20 214 2 Hexagonal nut M8
37 963 601 120 1 Suction head
41 965 451 901 1 Fuel tank cap cpl.
42 963 232 045 1 O-Ring 31x4,5
43 024 173 081 1 Pre-filter
44 941 719 171 1 Universal wrench 17/19
45 940 827 000 1 Angled screw driver T27
46 944 340 001 1 Carburetor screw driver
Chain saw 694
To Next Page
Loading...
